Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

Is there a PC configuration tool for my module, and what does its model drop-down do?

Viewed 0

Frequently asked by integrators; answered by ERDI Engineering.

Can I download the PC software for the LR1200E2 to set the baud rate and watch the distance? I have also seen a serial tool with entries like VB22A(mm) and VB22A(cm) and am not sure what choosing between them does.

1 Answers

For the LR1000E2 and LR1200E2 there is no PC tool; you control these modules with the serial commands in the manual (for example 55 AA 88 FF FF FF FF 84 for a single shot, and 55 AA TYPE FF FF FF FF SUM for the baud rate, where TYPE 07 is 115200 and a new baud rate applies after a restart). The factory configuration software is provided to customers whose order has been paid, and only for the models in its list. You can always use the open tools:

  • the browser serial monitor (Chrome or Edge, nothing installed, CSV export);
  • the open-source driver and protocol documents at https://github.com/ErdiTech/erdi-lrf-drivers (MIT licence), including the Python command-line tool.

About the model drop-down in the factory serial tool: it only decides the display unit; it sends no command to the module. We analysed the shipped tool statically and found three groups: VB (mm) entries show the raw 16-bit value as millimetres, VB (cm) entries divide that value by 10 and show centimetres, and the H-series entries show the raw value as centimetres. The frame parser is identical for all of them. VB modules always output millimetres; the (cm) entry is only a convenience conversion. The tool's log file stores the decoded value in the displayed unit, sampled in blocks of 1000 lines, so a short capture writes nothing and you cannot replay the log through a frame parser. Keep your own raw capture as the evidence.

One more detail from that analysis: with the VB (mm) entries the tool sends a fixed five-byte polling packet that is not in the current VB manuals. We treat it as undocumented until the factory confirms its purpose, so do not rely on it. Datasheet does not specify it; email us and we confirm in writing.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.