Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

LR1200E2, LR1500E2 or LR2000E2 for a 1 km survey accessory? How the three differ

Viewed 2

Frequently asked by integrators; answered by ERDI Engineering.

I am building a tripod-mounted distance accessory for site surveying and want a 905 nm module with a 3.3-5 V UART and a small footprint. The LR1200E2, LR1500E2 and LR2000E2 look almost identical on paper. What actually changes between them, and how should I pick for a working distance of about 1,000 m?

1 Answers

The three share the same architecture: 905 nm, UART-TTL at 115200 baud, 3.3-5 V supply, IP67 inside the lens cavity, 2-10 Hz adaptive update rate, roughly 25.65 x 13 x 24.6 mm. What changes is the range and, importantly, the accuracy budget:

Model Measuring range Accuracy as printed in the table
LR1200E2 4-1,200 m +/-1 m (6 to 500 m); +/-50 cm + d x 1 permille (500 to 1,000 m)
LR1500E2 4-1,500 m same two segments as LR1200E2 up to 1,000 m
LR2000E2 4-2,000 m +/-1 m (up to 400 m); d x 0.4 % (400 to 2,000 m)

At 1,000 m that works out to about 1.5 m for the LR1200E2 and 4 m for the LR2000E2. A longer-range part is not a more accurate part at the same distance, so choose the shortest range class that still covers your farthest realistic target with margin, and judge range on a low-reflectivity target, not the best case.

Three things the datasheets are not consistent about, so please do not design around a single value:

  • The LR1200E2 accuracy segment end point differs between our public datasheet (up to 1,200 m) and the archived factory manual (up to 1,000 m). Datasheet inconsistent; ERDI confirms the value in writing for your delivery.
  • Width is printed as 13.2, 13.05 or 13.3 mm depending on the document and model. Datasheet inconsistent; ask for the drawing before you cut a pocket.
  • The nighttime maximum figures (1,500 m for LR1200E2, 1,800 m for LR1500E2) are special-condition values, not catalog range.

Beam divergence on the LR1200E2 is below 4 mrad. Please also read https://erdilrf.com/docs/guides/blind-zone-and-minimum-range/ for the near end of the range. For pricing, samples and orders please use https://erdilrf.com/contact/ or email [email protected] — we keep commercial details out of the forum.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.