Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

SPD1200N0 cylindrical housing: how do I fix it? The drawing shows no mounting holes

Viewed 0

Frequently asked by integrators; answered by ERDI Engineering.

The SPD1200N0 is a cylinder with a groove. I need to fix it in an aluminium bracket on a small robot. I cannot find any mounting holes on the drawing. What does the datasheet say, and what is the safe approach?

1 Answers

The SPD1200N0 is built as a cylinder, Ø15.7 mm x 21.3 mm, with a sealing groove, and its drawing has no mounting holes. So the intended fixing is a bore or clamp around the body, with the groove used for sealing. The datasheet does not give a recommended bore diameter, clamp length, or the groove dimensions as a mounting spec. We will not guess these for you: please email us and we confirm in writing, with the drawing, before you machine the bracket.

What you can design around from the datasheet:

  • Range 0.2-1,200 m; accuracy +/-0.3 m up to 100 m, then +/-0.3 m + d x 0.7 permille.
  • Update rate "2-15 Hz or 4-15 Hz, adaptive" (the datasheet itself is ambiguous about the lower bound).
  • UART-TTL at 115200 baud, supply 3.3-5 V. IP67 applies inside the lens cavity.
  • Shock and vibration: 1000 g/ms (10 times per second along the optical axis) and 5-50-5 Hz at 2.5 g.

General mounting advice (not datasheet values): keep the clamp load off the optical windows, avoid a clamp that squeezes only one side of the cylinder (it will shift the optical axis when the robot vibrates), leave the front of both windows free of the bracket, and align the cylinder axis so the beam does not graze the robot body.

If the application needs a flat-plate fixing with screw holes instead, the SPD1200N3 and SPD1200ZG drawings show M1.6 holes (for example, 2 x M1.6 spaced 5.2 mm on the ZG). Compare the housings on the model pages before you commit to one.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.