Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

LRF600H mounting: M2 holes, pitch 29 x 13.25 mm, and how long the screws may be

Viewed 0

Frequently asked by integrators; answered by ERDI Engineering.

I am designing a 3D-printed bracket for an LRF600H and need the exact hole pattern, thread and screw length. The drawing is small and the STEP model seems to show a different hole depth. What do I use?

1 Answers

The LRF600H, and the LRF1500H with the same housing, have four M2 threaded holes on the lens face, one near each corner:

  • Pattern: 29 mm across, 13.25 mm along the other axis.
  • Thread depth: 5 mm on the drawing ("4-M2, depth 5"). ERDI Engineering has confirmed: M2 screws, 5 mm mounting hole. Use screws that do not go in more than 5 mm.
  • STEP model: shows 6 holes of 1.6 mm diameter, drill length 6.0 mm. The four corner holes sit at 29.0 x 13.25 mm and agree with the drawing; the model cannot distinguish thread depth from drill depth, which is why the model reads 6.0 and the drawing 5. Quote only the 5 mm thread depth to your machinist.
  • Housing: 33 x 34 x 18 mm in the table, weight 20 +/- 2 g. The STEP model measures about 33.9 x 33.0 x 18.5 mm, so leave clearance, and ask for the controlled STEP before final CAD work.

Plan the bracket for a plastic part by using heat-set inserts or through-bolts into the module instead of relying on the module threads for the whole load: the housing holes are small and only 5 mm deep.

Electrical items to put on the same drawing: five 1.25 mm leads of 50 cm (red 9-36 V, black power ground, yellow port ground, green TX, blue RX). ERDI Engineering has confirmed that TX and RX of the LRF600H are fixed at 3.3 V logic, independent of the 9-36 V supply, so they connect directly to a 3.3 V UART. Use a level shifter for a 5 V host.

The field of view is about 4 mrad, so keep the area in front of the lens free. For the 3D file see the STEP question in this community.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.