Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

SPD1200N3 mounting: hole pattern on the front plate and which dimension to trust

Viewed 0

Frequently asked by integrators; answered by ERDI Engineering.

I am designing a bracket for the SPD1200N3. The datasheet drawing and the text on page 1 do not seem to agree about the size, and I cannot find a hole pattern in the specification table. What are the mounting features?

1 Answers

The mechanical drawing (section 4.3, page 3) is the one to design from. What it shows for the SPD1200N3:

  • Front plate: 4 x M1.6 mounting holes. The lower row of two holes is 7.00 mm apart horizontally (tolerance +0.02 / -0.02). A 10.00 mm dimension is also printed on the upper part of the plate.
  • Flange (side view): a further 3 x M1.6 is marked.
  • Front plate size 14.00 x 18.00 mm; overall length 22.30 mm (+/-0.10) with a 21.30 mm main body; height 15.30 mm (+/-0.10). This matches the specification table: 14.0 x 18.0 x 22.3 mm, rectangular, 6061 aluminium alloy, 6 g or less.
  • Two 6.5 mm diameter windows (Launch and Receive), a 2.5 mm diameter hole to the left of the windows (its purpose is not stated on the drawing), and a 6-pin connector at the rear.

The inconsistency you noticed is real: the overview text on page 1 describes the module as "7.2 x 14.7 x 21.3 mm", which is the size of other SPD1200 housings, not the drawing. Datasheet inconsistent; use the drawing and have ERDI confirm in writing before you cut metal.

Thread depth is not printed on the drawing, so we cannot give you a screw length from the datasheet: please ask, and we confirm it in writing. The 3D model and STEP file are available on request (see the STEP question in this community).

Electrical points that often come up when mounting: supply is DC 3.3-5 V, the UART is 3.3 V TTL (customizable) at 115200 baud, IP67 applies to the lens cavity only, and the beam divergence is below 6 mrad, so leave clear space in front of both windows.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.