Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

Which connector and cable ships with VB and H modules? Terminal part numbers I can find

Viewed 0

Frequently asked by integrators; answered by ERDI Engineering.

I need to order mating connectors and make a harness for LRF10VB, LRF22VB, LRF50VB and an LRF50H. Which terminal types are on the pigtails, and where is the pin order?

1 Answers

The datasheet's "wire specification" row names the terminal fitted on each module's lead. For the models you listed:

Model Terminal on the lead Wire
LRF10VB 4-pin 1.25 mm, HC-1.25-4A 10 cm tinned stranded
LRF22VB 6-pin 0.8 mm, HC-0.8-6PWT 20 cm tinned stranded
LRF50VB 4-pin 1.0 mm, HC-1.0-4PLT 10 cm tinned stranded
LRF50H 5-pin 1.25 mm, M1250V-05P 50 cm tinned loose wire

Pin order is not standard across models, so take it from the model page and do not copy it from a neighbour:

  • LRF10VB: 1 TX, 2 RX, 3 GND, 4 5 V.
  • LRF22VB: 1 NC, 2 3.3 V, 3 TX (SCL), 4 RX (SDA), 5 NC, 6 GND.
  • LRF50VB: 1 GND, 2 3.3-5 V, 3 RX (SDA), 4 TX (SCL).
  • LRF50H: 1 9-36 V (red), 2 GND (black), 3 GND (yellow), 4 TX (green), 5 RX (blue).

On the VB parts pins 3 and 4 are shared between UART and I2C, which is why the pin table uses SCL/SDA names; the "User Interface" column in the datasheet gives the host-side direction. Always record the mating connector part number in your build documentation, because a mirrored connector can put the supply on the TX pin.

Be careful with supply: the LRF22VB runs from 3.0-3.6 V, the LRF10VB from 4.5-5.5 V, the LRF50VB from 3.3-5 V and the H series from 9-36 V. A wiring mix-up here damages modules faster than any protocol error.

For the LR1000E2 and LR1200E2 the module ships with a 6-core lead, so a separate mating connector is not required, but the datasheet does not name a connector part number: ask us and we confirm in writing. Connector brand and part number for the other models are not given in the datasheets either. For pricing, samples and orders please use https://erdilrf.com/contact/ or email [email protected] — we keep commercial details out of the forum.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.