Forums Technical Articles Developer Docs 中文区 UART Decoder Module Database Models Quotes & Orders EN · 中文 · 日本語 · DE · ES

How do I get a STEP file for mechanical design, and what do the datasheet drawings tell me meanwhile?

Viewed 0

Frequently asked by integrators; answered by ERDI Engineering.

I am drawing an enclosure around an LR1200E2 and need the 3D model. Is the STEP file downloadable, and what can I rely on from the datasheet drawing while I wait?

1 Answers

The 3D viewer model on each product page is public. The STEP file is a controlled document and is not offered as a public download: tell us the model and what you need it for through the contact page or by email, and we send the file for that model. We do not have a STEP file for every model; for the ones we hold, we send it on request.

What the LR1200E2 drawing gives you right now (datasheet section 4.3, Mechanical Interface):

  • External size in the table: 25.65 x 13.2 x 24.6 mm. The drawing shows 25.65 long, 24.6 high and 13.05 wide, plus a 9 mm dimension. A public datasheet revision prints 25.7 +/- 0.1 x 13.3 +/- 0.1 x 24.6 mm. Datasheet inconsistent: three width values exist (13.05, 13.2, 13.3 mm). Design with the larger value or wait for our written confirmation.
  • Mounting: the drawing marks M1.4 beside the optical windows. Hole count and depth are not stated on the drawing.
  • What the STEP model shows (measured from the geometry, not a drawing dimension): two mounting holes of 1.1 mm diameter, 9.0 mm apart centre to centre and 5.0 mm deep, matching the M1.4 mark. The same hole geometry appears in the LR1000E2, LR1500E2 and LR2000E2 files. The model also has two 1.1 mm holes on the side, 5.0 mm apart and 2.5 mm deep, with no matching mark on the drawing.
  • Connector: 6 pins (GND, VCC, I/O reserved, TXD, RXD, SW-SHOT). The datasheet gives no connector part number, and the module ships with a 6-core lead.

Confirm thread engagement with us before you size screws; the datasheet does not give a screw length. Please also leave free space in front of both windows and keep the lens clear of the enclosure wall.

Sources:

ERDI Verified Answer — checked against the datasheet by ERDI Engineering.

ERDI Engineering Community is run by ERDI TECH LTD (Chengdu, China) · erdilrf.com · GitHub · Civil applications only · Questions about modules from any brand are welcome.